This little village - expanded in the 1920s - has two interesting buildings separated by 700 years...
The natural wooden floor can span the centuries - ever popular for combining beauty with practical wear and ease of maintenance.
Yet a surface subject to wear and damage... When your floors have become a mass of scratches and digs, it’s time to bring them back to their original beauty.
With specialist floor repair and restoration from:
The Perivale Floor Sanding Company
All you need for your new surface:
Realigning and securing wobbly boards or blocks.
Repairing damaged areas with matching timber.
Gaps filled - for an even look.
Sanding away old paint or sealant.
Staining the smooth wood to change the colour
Renewed sealant of natural oil, hard wax or lacquer.
A new look?
Match your decor - or create a new look with lighter or darker stains. The eco-look will brighten up the home or work areas.
Mess and disruption?
Have no fears - modern sanding is 99% dust free.
We will minimise any inconvenience to your domestic or business schedule.
By working flexibly - at weekends or even overnight.
And help you out by removing items of furniture - and disposing of old carpets and coverings.
Only the highest quality:
In stains and sealants - for a new surface to last longer and retain its looks.
In workmanship and attention to detail - from our fully-trained staff.
After care:
Your new floor is a valuable investment that will repay due care and attention. Take our advice on the aftercare it will appreciate for the sealants used.
Commercial Floor Sanding:
Your customers, visitors and staff deserve to tread on a worthy surface -
in the shop, office, library, school, gym, bar or restaurant...
Take the best advice -
From a reliable family firm - restoring hundreds of floors for the past twenty years.
Ask us for your FREE assessment today.
The Perivale Floor Sanding Masters!
St Mary’s Church is a delightful 13th century building of modest proportions with a weatherboarded tower of the 1500s. It contains a tiny brass and two impressive monuments.
It was in grave danger of abandonment and conversion - yet was saved in 1976 and is now a popular venue for musical concerts.
A contrast with the Hoover Building of 1932-38. This unmistakeable distraction for passing motorists was once described as ‘perhaps the most offensive of the modernist atrocities along this road..’.
It’s now viewed as one of the most important art deco buildings in the country..
TRUSTED BY THESE WELL KNOWN BRANDS AND HUNDREDS MORE.
With over 26 years of sanding knowledge,
we're dedicated to making sure that your wooden
floors always get the best restoration service there is.
One of the quickest and most effective ways to sand a floor is by using a belt floor sanding machine. If you fancy taking the DIY route and tackling a small project yourself, you can hire one from a good tool hire shop. Although the specifics of each machine vary, the basic principles of operation are the same.
How to use a belt floor sander
Start off by opening up the side of the machine and loading the new belt. Make sure that the belt is facing in the correct direction - the arrows marked on the inside of the belt should follow the same direction of forward travel as the drum. Slot the belt onto the drum, and make sure that the tensioner is activated to take up any slack. This is usually done by tightening a marked toggle. If the belt is too loose, the sander won’t work properly and will leave ‘chatter’ marks across the floor.
When you’re ready to begin sanding, DO NOT put the sander’s drum down
when the machine is switched on and stationary. This will leave a mark on the floor, which you’ll have to go
over again to remove. Keep the machine tilted back towards you to keep the drum out of contact with the
floor until you’re ready to begin moving, and then lower the drum. When you reach the end of the room, lift up
the drum, turn around to make the return pass, and lower the drum again once you’re moving forward.
To start the drum rotating, switch on the machine and pull the drive lever towards you. Lower the drum to the
floor; it should feel as though the sander is pulling you forwards, rather than you having to push it. Walk
slowly, allowing the machine to do the work.
Keep an eye on the dust bag that’s attached to the sander. Empty the bag when it’s about half-full. A full bag
could back up into the machine, causing it to clog and stop working properly. In addition, leaving extra
capacity in the bag helps to keep the dust extraction process efficient. To remove the dust bag, turn off the
machine, and unclip the bag from the fixing. Empty out the debris into a bin-bag and re-fix the dust bag to
the machine.
In conclusion
Operating a belt floor sander is pretty straightforward provided that you follow the supplier’s instructions that will be provided by the tool hire shop, and take note of the helpful tips given above.